Nowadays, if you consider the increasing rate of your manufacturing operations, you will understand that the need for Desiccator Box has increased quite a lot. There is no doubt that if moisture or its effects are not well protected that too in a timely manner then it may lead to a lot of issues. This is the main reason why you need to make sure moisture needs to be well protected. Looking at the critical components that have become small and quite a lot sophisticated, the good susceptibility to the moisture damage has increased quite a lot.
Reason why you need Desiccator and Dry Boxes:
The prime reason why you must opt for Desiccator and Dry Boxes is because of the increasing moisture that is likely to get stored in the products which are susceptible to the moisture. Generally the sensitive components if exposed to water or moisture can result to a lot of disastorous results. Even the less traces of the oxidation can cause the bad effects and ultimately result to the damages. Since water dissolved the iconic contaminates, it also can change the material conductivity precaution of which its electrical functioning may get degraded. Water also blends with other materials because of which harmful chemicals may increase which would degrade the chemical mixture and pharmaceutical samples.
Other than this, the dry storage of Desiccant also helps in avoiding some of the drawbacks that you might not be even aware about. Talking of which, such system is responsible in removing the moisture from the supply air line. It also comes with the dual tower design which performs in off line and on line drying so that operation does not get interrupted at any point of time. You need to make sure that it is clearly monitored o that there is no gas flow that would enter below the humidity threshold. No doubt that it is the most effective solution but it is also true that it has got high complexity because of which it turns out to be the most expensive long terms application of storage.
Other than Desiccator and Dry Boxes, there is also an alternative of nitrogen-purged desiccator systems which focuses on maintaining the dry conditions that is the most convenient and cost friendly solution.
Know the Types:
It is available in four different types such as Laboratory Glove Boxes and each comes with the benefits sets those are automatic, standard, vacuum and gas purge.
Standard Desiccator: This type of unit is monitored and operated manually. It is absorbed from the air and then the desiccant will get stored and then replaced.
Automatic Desiccators: In this unit the use of fan is made for regular regeneration of the desiccant to make sure the desiccant saturation is prevented.
Gas Purge Desiccators: For all those people who have been looking for the quick humidity removal from the environment, this is the best option to choose.
Vacuum Desiccators: It is best in those situations where the humidity and air needs to be removed from the environment and thus make it dust free.